What Are The Safety Issues Of Voltage Stabilizers?

⒈Dynamic Voltage Regulator (DVR) When the power is turned on, please do not disassemble the voltage stabilizer or pull the input and output wires of the voltage stabilizer at will to prevent electric shock or other electrical safety accidents.

⒉The input and output wires of the voltage stabilizer must be arranged reasonably to prevent trampling and wear, which may cause leakage accidents.

⒊The voltage stabilizer must be reliably grounded. The user shall be responsible for any electric shock or human injury caused by running without grounding wires.

⒋The ground wire of the voltage stabilizer cannot be connected to public facilities such as heating pipes, water supply pipes, and gas pipes to avoid infringing on the rights of third parties or causing harm.

⒌The input and output wires of the voltage stabilizer should be checked regularly to prevent loosening or falling off, which will affect the normal use and power safety of the voltage stabilizer.

⒍The selection of the voltage stabilizer connection wire must meet the requirements of the connection wire that can carry sufficient current capacity.

⒎.The voltage stabilizer should be handled with care and avoid severe vibration during operation.

⒏ Ensure that the carbon brush spring of the voltage stabilizer has sufficient pressure to prevent sparking between the carbon brush and the coil contact surface.

⒐ Non-professionals are not allowed to disassemble or repair the voltage stabilizer.