Precise Matching Of Conveyor Belt And Equipment Speed Is Achieved By Using Frequency Converters And Nuclear Scale Signal Regulation.

frequency converter 60hz to 50hz single phase Combines the 0~5V signal output by the nuclear scale to dynamically adjust the conveyor belt speed to match the equipment rotation speed, further ensuring product thickness stability and synchronizing the conveyor belt speed with the equipment spindle or rotor speed. During system operation, frequency converter 50hz to 60hz single phase adjusts the belt speed based on changes in the nuclear scale signal, thus keeping the equipment rotation speed consistent with the material accumulation state. In this mode, the conveyor belt speed is no longer fixed but changes in real time based on feedback from the nuclear scale to cope with fluctuations in material thickness or changes in load.