Laser Cutting Machine's Good Partner --- Automatic Voltage Stabilizer

The laser cutting machine uses the steep temperature distribution generated by laser grooves to generate local thermal stress in brittle materials, causing the material to break along the small grooves, thereby achieving the purpose of cutting. However, during the use of the laser cutting machine, due to voltage and other issues, the laser cutting machine is unstable. At this time, it is necessary to match it with a laser-specific Automatic Voltage Stabilizer to provide it with a stable voltage so that the equipment can operate normally.

Automatic voltage stabilizer, a power supply circuit or power supply equipment that automatically adjusts the output voltage, its function is to stabilize the power supply voltage with large fluctuations and unsuitable electrical equipment requirements within its fixed value range, so that various circuits or electrical equipment can operate normally under the rated working voltage.

Advantages of automatic voltage stabilizer:

1. It has an intelligent display, high safety, simple operation, and the data display system is very clear and accurate.

2. Make product performance more reliable, reduce maintenance costs, and effectively ensure the normal operation of the equipment.

3. Fast response speed. When the voltage changes quickly and fluctuates frequently, the automatic voltage stabilizer can always keep the output voltage at the required stable voltage value.

4. No compensation operation is required at startup, and the input and output voltages remain consistent, so that electrical appliances will not be damaged due to too high or too low voltage at startup.

5. The whole machine has no mechanical operation, no carbon brush contact, no noise voltage regulation, no instantaneous power failure, fast response speed, lightning surge protection and all protection functions.

6. Strong overload capacity, can be used continuously under 100% rated load conditions, and can withstand 10 times the current for 10 milliseconds and 3 times the current for 1 minute without damaging the machine, while the carbon brush voltage regulator will easily burn out if it runs at full load for a long time.

7. High voltage regulation accuracy: The accuracy of the CNC contactless voltage regulator is +--1%, that is, if the input voltage is 220V, then the output voltage is also around 220V, and will not fluctuate too much, while the voltage regulation accuracy of the carbon brush voltage regulator is poor, from +-2% to +-5%. 8. Safe, reliable and efficient: It is equipped with overload, overvoltage, short circuit and other protections, and the efficiency is as high as 99%. The carbon brush voltage stabilizer does not have these protection functions and is prone to burnout and other problems.

The contactless voltage stabilizer can be widely used in: laser cutting machines, welding equipment, medical equipment, 3D printers and other places that require stable power supply.